ODE MK2 / DIN ODE MK2 Release Notes


------------------------------------
ENTTEC ODE MK2 Firmware V3.13 (June 2019)
------------------------------------
- Fix: Modification to IP validation process.


ENTTEC ODE MK2 Firmware V3.12 (May 2019)
------------------------------------
- Fix: Fix RDM discovery timing issues with inline devices like DIN RDS4


-------------------------------------
ENTTEC ODE MK2 Firmware V3.11 (May 2019)
------------------------------------
- Fix: resets the PHY chip when the link is down, to restore network operation


-------------------------------------
ENTTEC ODE MK2 Firmware V3.10 (Jan 2019)
------------------------------------
- Fix: Control4 URL required change
- Fix: Control4 notify alive packet sent on start up and when ethernet is connected


-------------------------------------
ENTTEC ODE MK2 Firmware V3.9 (Jan 2019)
------------------------------------
- Fix: Netmask, IP Address and Gateway IP settings are shown for both DHCP and Static IP configuration in the home page


-------------------------------------
ENTTEC ODE MK2 Firmware V3.8 (May 2018)
------------------------------------
- fix: switch to sACN from Art-Net, without having to disable RDM


-------------------------------------
ENTTEC ODE MK2 Firmware V3.7 (Feb 2018)
------------------------------------
- Fix bad RDM packet size


-------------------------------------
ENTTEC ODE MK2 Firmware V3.6 (Jan 2018)
--------------------------------------
- fix: DMX output is fixed to 512 slots (was dependent on Input earlier)
- new: Control4 support


-------------------------------------
ENTTEC ODE MK2 Firmware V3.4 (Nov 2017)
--------------------------------------
- fix: sACN address can be changed correctly in Settings
- new: Art-Sync supported (Art-Net)
- fix: RDM related fixes


-------------------------------------
ENTTEC ODE MK2 Firmware V3.3 
--------------------------------------
- Default Gateway can now be changed
- sACN fix: IGMP join messages sent correctly 
- Ethernet fix: Reset on startup


-------------------------------------
ENTTEC ODE MK2 Firmware V3.2 
--------------------------------------
- First release
- Supports ODE MK2 and DIN ODE MK2