eDMX (Art-Net / sACN)

Sending eDMX over WiFi
For the most reliable installation, it’s recommended to use a wired connection where possible (i.e. using a Lightning-to-Ethernet Adaptor); however, if cont...
Tue, 5 Apr, 2022 at 9:00 AM
Output Merging & Holding Value on data loss
When the signal is lost on an ENTTEC DMX device the last value is held until either the signal returns or the device is power cycled.  If the device sup...
Wed, 18 May, 2022 at 9:11 AM
Art-Net
What is Art-Net? Art-Net is essentially DMX over IP (DMX over a network). However, unlike DMX, you can send thousands of DMX universes over one cable at on...
Thu, 7 Apr, 2022 at 11:08 AM
Sending Art-Net/sACN using a PLC
Most PLC’s have the ability to send ArtNet or sACN packets, however, they aren’t necessarily designed for sending constant streams of data with 1000’s of di...
Thu, 15 Sep, 2022 at 9:18 AM
Home Automation - Do I need specific drivers for ENTTEC products?
In short; NO. - Generic Art-Net or sACN drivers only. There isn’t a specific driver for the DIN-ETHERGATE ODE or any other ENTTEC product. Instead, thes...
Thu, 15 Sep, 2022 at 9:14 AM