Octo Mk2 (71521)

With 8 universes of Ethernet-DMX to pixel protocol conversion and network chaining between devices; the OCTO MK2 allows for fast deployment of LED strips and pixel dot systems. The OCTO MK2 is packed with installer-friendly features such as an identify button to check correct wiring, a wide input voltage range (5-60VDC) and the flexibility to power it directly from the same source as the LED pixels. All are contained within a slim, electrically isolated 4 DIN form factor. Furthermore, the newly released OCTO MK2 supports more than 20 pre-listed pixel output protocols below and allows the creation of custom pixel protocols (criteria apply, see user manual). All firmware updates and intuitive configuration management are conveniently accessible through its localhost web interface.

Controlling different voltages or protocols at the same time
Dots of varying voltage can be connected to the same OCTO – the OCTO will take its power from the input with highest voltage.
Fri, 8 Apr, 2022 at 7:38 AM
OCTO protocol configuration
The OCTO can be configured to output one protocol at a time only. (Not a different protocol per port).
Fri, 8 Apr, 2022 at 7:38 AM
Resetting to Factory Default
Factory resetting the OCTO results in the following: Resets the device name. Enables DHCP. Static IP Address reset (IP address = 192.168.0.10). Resets ...
Tue, 31 May, 2022 at 9:38 AM