I believe this is the newer version of what I have... my cans are black, only have DMX in/OUT and the red 10 dipswitch block.
https://www.gtmall.com.au/led-par-64-can-disco-light-short.html
Professional polished aluminium Par 64 Can with bracket6 DMX 512 Channel,
Stand alone and Master/Slave operationFunctions:
Blackout/static/dimmer/strobe
Sound active mode
Auto mode
Static colour mixing
RGB colour mixing
Internal programs with sound activation
Speed control
Master/slave
Linkable
177 Ultra bright 10mm LED's (red 60, Blue 56, Green61)
LED Technology: emits No heat, long Lamp life: 100,000 hours
Craig Geoffrey Stevens
Hey Guys, I have been given three VERY old PAR cans, ASHTON177 Stage PAR LED.
They only have a dip switch (1-10) at the back as well DMX in/out.
Again they are very old but I want to see if I can get them working at some level (more for learning/education than anything, we may use them if they look good).
DIP 10 - on = DMX is on
DIP 7 is DMX 64
DIP 1 is DMX 1
Of course to get the DMX its DIP 1 + DIP 2 + DIP 3 ... ... = DMX channel ID
I believe they are 5 channel PAR CANS.
what generic fixture do you think would work in EMU?
I think the first channel is Strobe, when I set the first it strobes but also goes through every colour, each flash is a different colour, the higher the value the slower the strobe, the rest dont seem to make much difference, but I also cant use DIMMER as I dont know what channel its on...
Any thoughts, advice or feedback would be appreciated. Yeah I could go buy another SLIMPAR 35 or COB30 for $100 or so bucks, but I want to learn something new.
Thanks in Advance