"TypeError: Failed to Fetch" on Enttec Web Interface
S
Sam Cleary
started a topic
8 months ago
I have been unsuccessful in attempting to configure my MOD Mk3 using the Enttec Web Interface. I am plugging in the ODE Mk3 into my PC via Ethernet and setting my PC's static IP Address to 192.168.0.201 and Subnet Mask to 255.255.255.0
My ODE MK3 says its static IP is 192.168.0.1 underneath the serial number and I confirmed this using Enttec's legacy Node Management Utility v.1.65
When I type in 192.168.0.1 into my web browser I land at Enttec's Web Interface, but I get an error Message "TypeError: Failed to Fetch" and all Fields are blank. I was also unsuccessful trying to upload the latest firmware to the Web Interface.
Sam Cleary
I have been unsuccessful in attempting to configure my MOD Mk3 using the Enttec Web Interface. I am plugging in the ODE Mk3 into my PC via Ethernet and setting my PC's static IP Address to 192.168.0.201 and Subnet Mask to 255.255.255.0
My ODE MK3 says its static IP is 192.168.0.1 underneath the serial number and I confirmed this using Enttec's legacy Node Management Utility v.1.65
When I type in 192.168.0.1 into my web browser I land at Enttec's Web Interface, but I get an error Message "TypeError: Failed to Fetch" and all Fields are blank. I was also unsuccessful trying to upload the latest firmware to the Web Interface.
Any idea how I can fix this?
I'm running Windows 10 Home on my PC.
1 person has this problem