Hi Andy,
An imediate note would be that EMU only sends Art-Net while the crestron system would appear to intend to use sACN.
So when doing your EMU tests, I'd make sure you have the ethergate set to the correct protocol.
If you have any screenshots of settings in both the Ethergate and your EMU settings thats would be handy too!
Also, have you been able to discover the ethergate in EMU and also connect to it's web interface?
Andy White
Hi,
I've got the Din Ethergate marketed as the Crestron DIN-SACN-DMX and I'm having a hard time finding any resources for integrating the two.
In the mean time, I've been trying to sent DMX level to the DNX decoder via the Din Ethergate and EMU software but not having any luck... I believe I'm missing a critical piece connecting the EMU software to the Din Ethergate ... I have watched the tutorials and not new to this type of technology...