Hi Simon,
Looks like it might be an ODE Mk1 not an ODE Mk2.
The Mk1 didn't have a webpage and was only configurable through the old NMU software. NMU is end of life but the last versions of it can be found here:
https://support.enttec.com/support/solutions/articles/101000401530-open-dmx-ethernet-mk1-ode-70305-70306-legacy-product
Once you have configured it how you need you wil be able to use it with EMU.
It also looks to be using it's fallback IP address which is in a different range to your computer. Make sure your computer is in the same IP range as otherwise even if it is an ODE Mk2 you won't be able to load the webpage.
Simon (sjp770)
I have 2x ODE mk2's on my network - the second one is new to me and had an unkown IP address. Using EMU I have found it on 10.7.170.83 however it displays differently to the other odeMk2 I have (.35) and I cant open the webpage to change its IP / update the config and firmware. I have my PC set at 10.7.170.1 (Aslo tried .254 and.253) /24. The device responds to pings but what is my next step?