Splitter: DIN-RDS4 (72004)
4-way DMX/RDM splitter in compact 4-module DIN-rail form factor. 72004
The DMX output signal is not an exact copy of the input. The DMX levels transmitted stay the same; however, the RDS4 manipulates timing to check and send RD...
Tue, 5 Apr, 2022 at 8:39 AM
When connecting multiple RDS4s together when using RDM use the wiring schematic as shown below to ensure RDM data is managed correctly. Wire a 120Ohm thru-...
Tue, 5 Apr, 2022 at 8:39 AM
As per the DMX standard, a maximum of 32 devices can be daisy-chained to any single DMX feed (i.e. 32 fixtures can be connected per DMX output). To incr...
Tue, 5 Apr, 2022 at 8:41 AM
The maximum refresh rate is 43 frames/sec. The DIN-RDS4 updates all outputs once it receives an update on its input. If the refresh rate is above this, fram...
Tue, 5 Apr, 2022 at 8:41 AM