DMX USB Pro Mk2 (70314)

USB to DMX interface (RDM) 1024 channels (2 universes)

DMX USB Pro Mk2: DB-15 breakout
The Pinout of the ENTTEC DMX USB Pro Mk2’s DB-15 breakout is shown below:   Note: The MIDI breakout cable was discontinued in Q1 2021. Support has officia...
Mon, 21 Nov, 2022 at 8:41 AM
DMX USB Pro Mk2: Status LED
The colour of LED signifies current status or activity of the ENTTEC DMX USB PRO Mk2: Flashing White: Powered on and idle. Flashing Green and White: DMX ...
Mon, 21 Nov, 2022 at 8:42 AM
DMX USB Pro Mk2: Error Mode
If the device is in error mode (static Red LED), this could have been caused by a driver or a firmware issue, which will require a re-flash to resolve. ...
Mon, 21 Nov, 2022 at 8:42 AM
DMX USB Pro Mk2: MIDI Functionality
 Feature Deprecated Q1 2021 - This feature is no longer actively developed, or the Pro Mk2 MIDI cable sold.    The DMX USB PRO Mk2 implements MIDI in as p...
Mon, 21 Nov, 2022 at 9:14 AM
DMX USB Pro Mk2: Standalone Mode
Record a Standalone Show: Open our EMU software. Navigate to the Settings menu by navigating to the gear icon in the top right corner, then navigating to...
Mon, 21 Nov, 2022 at 9:14 AM