Skip to main content

DIN RDS4: Latency allowance

Updated Apr 23, 2026
8 Views
100% found this helpful

The DMX output signal is not an exact copy of the input. The DMX levels transmitted stay the same; however, the RDS4 manipulates timing to check and send RDM Messages between frames.


There is a delay of ~30 milliseconds between receiving the input frame and outputting the data on each of the 4 RDS4’s output ports.

Was this article helpful?

Let us know if this article helped answer your question.

You can only submit feedback once per article.

Thank you for your feedback!

Your input helps us improve our knowledge base.

Back to Splitter: DIN-RDS4 (72004)