Planning a project with ENTTEC Pixel Dots? Pixel Designer is a free online tool that turns your idea into a complete Pixel Dot system, ready for a quote.
Open Pixel Designer: https://pixeldesigner.enttec.com/
What Pixel Designer does
You describe the installation. Pixel Designer works out the system around it:
- the Pixel Dot strings you need
- the controllers that drive them
- power supplies
- cabling
The finished design gets a design number. A sales engineer uses that number to prepare your quote, so you do not have to explain the project again.
How it works
- Pick a layout. Choose the type of installation: facade, outline, canopy, stage or line.
- Shape it. Set the size of the area and the spacing between dots.
- Controllers. Tell us where the controllers will be installed. Pixel Designer chooses suitable hardware from that.
- Your design. Review the result and request a quote.
Prefer to describe it in words? Type something like "a 30 by 10 metre building front, dots every 300 mm" and Pixel Designer fills in the first steps for you to check.
Getting a quote
Pixel Designer does not show prices. When your design is ready, request a quote from the design page. Your design number goes to our sales team, who will contact you with pricing and lead times.
Already have a design number? Enter it on the Pixel Designer home page to open your design and carry on where you left off.
When to talk to sales directly
Pixel Designer covers the most common Pixel Dot layouts. If your project is very large, has an unusual shape, or mixes Pixel Dots with other products, start a design anyway and mention the details in your quote request, or contact us.