Enhanced configuration of a micro SD card for the ENTTEC S-Play

To configure a micro SD card for the ENTTEC S-Play, follow these steps:

1. Insert the micro SD card into the SD card slot on your computer or a card reader.
2. Format the micro SD card Linus EXT TS, ie. EXT3 or EXT4  file system. You can do this using your computer's built-in formatting tool or a third-party formatting tool such as SDFormatter.
3. Create a folder named "ENTTEC" on the root of the micro SD card.
4. Inside the "ENTTEC" folder, create another folder named "S-Play".
5. Download the latest firmware from the ENTTEC website and unzip the file.
6. Copy the unzipped firmware file (with the .upd extension) into the "S-Play" folder on the micro SD card.
7. Safely eject the micro SD card from your computer or card reader.
8. Insert the micro SD card into the ENTTEC S-Play's micro SD card slot.
9. Power on the ENTTEC S-Play and wait for it to boot up.
10. Press the menu button on the ENTTEC S-Play and navigate to the "Upgrade Firmware" option using the up/down arrows.
11. Press the menu button to start the firmware upgrade process.
12. Wait for the firmware upgrade process to complete. The ENTTEC S-Play will automatically reboot once the upgrade is finished.

That's it! Your micro SD card is now configured for the ENTTEC S-Play and the latest firmware is installed on the device.