DISCONTINUED September 2021: This product has been superseded by an updated version 73926.


  • 12-24V input (20A maximum).
  • Output to LED strip (5A per channel maximum).
  • Huge 1KHz PWM signal refresh rate.
  • PLink in and out connector for auto-addressing (each unit can be spaced up to 300m away from the next when using PLink over Cat6 cable).
  • Single DMX connector for DMX/RDM input, or chaining between devices.
  • Status LED and mode selection DIP switch to toggle between bitrate and RGB/RGBW operating modes.
  • User-serviceable fuse to protect against short circuits.
  • Passive cooling with internal overheating protection.
  • Compact design with integrated 4mm surface mounting holes.

Documentation & Files:


  • How to replace the CVC4’s fuse (video demonstration)


All CVC4 (pn: 73925) documentation can be found below: