The S-Play’s relays have been designed for use with low power devices and logic for high power relays.
The S-Plays relay specifications are as follows:
- Maximum Current Throughput: 2A
- Maximum Voltage Rating: 50V DC
The total switchable power of the S-Plays relays is 60W. - To calculate to total power your circuit will pass through the relay, multiply the circuit voltage by the current you intend to pass through it. This value must be lower than 60w:
Example 1 | Example 2 | Example 3 | |
Current | 1.2A | 2A | 2A |
Voltage | 50V | 30V | 50V |
Maximum Power | 60W | 60W | 100W |
Suppose your application requires mains power switching or high current applications. In that case, ENTTEC recommends using a DMX switch pack controlled by the S-Play’s DMX output or wiring the S-Plays relay outputs to connect to the primary coil of a DIN mount high powered relay.