eDMX (Art-Net / sACN) & Networking
23 articles in this folder
Art-Net and sACN troubleshooting: a symptom-based checklist
This is the checklist to work through when Art-Net or sACN misbehaves: no output, nodes that cannot be discovered, flick...
Art-Net explained: DMX over Ethernet
What is Art-Net?Art-Net is DMX over IP: a protocol, published by Artistic Licence, that carries DMX512 lighting data ove...
Art-Net network design: unicast vs broadcast, IP addressing and switches
Art-Net runs happily on almost any Ethernet network at small scale, which is exactly why it bites people at large scale:...
Art-Net to DMX: how a converter node works and how to set one up
An Art-Net to DMX converter (usually called a node or gateway) takes lighting data arriving over an ordinary Ethernet ne...
Art-Net vs sACN: which should you use?
Art-Net and sACN do the same job: they carry DMX512 channel data over an ordinary Ethernet network, so a controller can...
Networking: Bandwidth Planning
When using Art-Net and sACN, it's essential to ensure that your network infrastructure has enough capacity to handle the...
Networking: Chaining Network Devices
All network switches from that feature inbuilt network switches for IN and THRU (not just ENTTEC products)introduce a s...
Networking: Change IP address (Windows)
This guide requires you to have administrator privileges on the computer. If you do not, you’ll need to sign into an acc...
Networking: Change IP address (macOS)
This guide requires you to have administrator privileges on the computer. If you do not, you'll need to sign into an acc...
Networking: Connecting to Web Interface
Connecting the device's web interface allows remote configuration of the device's settings and is a strong indicator tha...
Networking: Legacy Products
Over the years there has been some slight differences between ENTTEC products. Remember that you will also need to set t...
Networking: PoE (Power over Ethernet)
If your ENTTEC device is working when plugged into a DC power source but does not work when plugged into your PoE power...
Networking: Remote access via the Internet
Remote access via the Internet Excluding the S-Play Show controller, Typically, ENTTEC Ethernet devices are not design...
Networking: Terminology
TABLE OF CONTENTS Dynamic Host Configuration Protocol (DHCP) Static IP Recommended network configuration IGMP Vers...
Networking: Web interface troubleshooting
If your ENTTEC device’s web interface not loading/is slow to load we recommend trying the following steps: Try a diff...
The eDMX (Art-Net / sACN) Control Scheme
This page shows the control scheme of an eDMX (Art-Net or sACN) rig built on ENTTEC hardware: what connects to what, fro...
Using Resolume Arena with ENTTEC Art-Net nodes
Resolume Arena can drive real lights: the same composition you are pixel-mapping onto LED screens can run DMX fixtures a...
Using sACN priority for seamless handover between playback (S-PLAY) and live console
Problem In complex venues, customers want a scheduled playback (typically driven by an S-PLAY) to run automatically, but...
eDMX (Art-Net / sACN): Compatible Software
We’ve listed just some of the software compatible with ENTTEC hardware below: Note that this list is not exhaustiv...
eDMX (Art-Net / sACN): Home Automation
Do I need specific drivers for ENTTEC products? In short: NO. Generic Art-Net or sACN drivers only. There isn’t a specif...
eDMX (Art-Net / sACN): Output Merging
There are several different methods of merging & combining DMX. We’ve outlined the methods below alongside a list of...
eDMX (Art-Net / sACN): Sending over WiFi
For the most reliable installation, it’s recommended to use a wired connection where possible (i.e. using a Lightning-to...
eDMX (Art-Net / sACN): Sending using a PLC
Most PLC’s have the ability to send ArtNet or sACN packets, however, they aren’t necessarily designed for sending consta...