ELM
22 articles in this folder
CONNECTING MIDI CONTROLLER TO ELM
1. Connect Your MIDI Controller Plug your MIDI device into your computer (or set up a virtual MIDI loopback like LoopMI...
Capture device with ELM
First,go to the media page Add Media and chose the 'capture device' chose the video capture card and select the resolu...
ELM CPU Usage is high
When using ELM, if you find that your computer's CPU usage is constantly spiking high then there are a few immediate fa...
ELM License not recognised or Invalid
If you load your license and get an error about an invalid license please check the following: The hardware ID use...
ELM OSC command reference (TouchOSC integration)
Where to find the canonical OSC syntax ELM ships with its full OSC command reference built into the application. To see...
ELM Promo code already used ?
If you get this error when try to register your ELM voucher, it means it has already been used previously. The code...
ELM Scheduler: Start Sequences Automatically
The ELM Scheduler starts your sequences automatically at set times, so an installation can run unattended every day. Thi...
ELM led strip Scale uniformly
Hold "SHIFT" on your keyboard and Drag the Scale icon of the selected led strip will make perfect uniformly Scale . &nb...
ELM license
TABLE OF CONTENTS ELM license Information Complimentary ELM license First-time registration via a new ELM voucher ELM T...
ELM stages lock
Inside ELM settings tap you can lock stages to prevent other people modify you stages. And the unlock pin code is your...
ELM-specified strip level setup
In some cases, certain fixtures may be too bright when at full intensity. If you need to reduce their brightness without...
ELM: Effects
TABLE OF CONTENTS Adding an EffectManipulating an EffectControlling an Effect RemotelyEditing/Creating Your EffectsShade...
Output Protocol
Output Protocol ENTTEC’s ELM software outputs the following protocols: Art-Net is the most lightweight DMX over Ethe...
Recommended computer specs for ELM
When specifying a PC to run ENTTEC LED Mapper, several important factors are to consider. You’re going to want a robust...
Remote Management, Control & Triggers
Priority The various remote input control methods within ELM can all be used at the same time to provide flexibility exc...
Running ELM on Mac using Windows Parallels
Our ENTTEC LED Mapping software, ELM, is a Windows-based program that is not supported on MacOS. However, we can create...
Syncing Video Playback on ELM: Fixing Speed Drift
ELM applies three separate speed multipliers to media playback: Master Speed, Stage Speed and Media Speed. If any of the...
Video Content Guidelines
Video Content requirementsWhen importing video content into ELM, it's important to minimize codec artifacts. These can c...
Video Input & Capture Cards
ELM allows you to incorporate real-time video streams concurrently from all manner of sources, including NDI, MPEG stre...
What To Do If Your ELM License Isn't Working
If you purchased an ELM license before October 2024 or you have received a free license voucher with the purchase of an...
What is LED mapping?
In simple terms, LED mapping is a convenient way to control a lot of lights, taking into account their positions in the...
What types of lights can I control with ELM?
ENTTEC LED Mapper sends standard eDMX protocols over a network (Art-Net4, sACN & KiNet), allowing its data to be used b...